Drivedata DR2 Especificaciones descargar pdf (Pagina 244)

Drive set-up procedure

14.1.10

Parameter initialization

-34

14.1.10 Parameter initialization

Initialize parameters of each drive to restore the factory default settings.

Servo drive

Initialize parameters using a Digital operator in the following procedures:

1. Connect a Digital operator to a Converter and select a drive (dr1, dr2...: the drive num-

ber is a value, 1 more than the rotary switch setting value of each drive) to check by

pressing [Up] or [Down] keys. Press [DATA ENTER] key.

2. Press [DSPL SET] key to display "Fn

□□□

". Select "Fn005" and press [DATA

ENTER] key.

3. "P. INIT" is displayed.

4. Press [DSPL SET] key. "done" is displayed and initialization completes.

Spindle drive

Initialize parameters by setting the following drive parameters.

• MD6988 (Cn8C8) RESERVED_FOR_USER_OF (Spindle)

Meaning: Parameter initialization

Setting value: 0 --- Initial value

1 --- Initialization start

Note: Notice that carrying out the initialization changes parameter values

that you have set to factory default values. Take a note of all the

parameters you have changed before starting the initialization.

14.1.11 Alarm display

 Display at CNC

If an alarm is issued in a drive, the following alarm is displayed. Since this alarm is transmit-

ted from the drive to a CNC through a high-speed cyclic communication line, the alarm indi-

cation at CNC precisely shows the time when the alarm was issued.

Example: When an alarm is issued at X1 axis.

25201: X1 drive failure

Detailed information on the alarm is displayed on CNC screen.

EXAMPLE

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 372 373

Sin comentarios

Drivedata DR2 Especificaciones Pagina 244