Drivedata DR3 Manual de usuario

DRIVEDATA DR3 DVR User’s Manual Version 2.0.5 2009-05-01

Installation - 4 - 2. Installation 2.1 Preparation Please read user’s manual careful before installation. Check the minimum requirements of system an

Configure DR3 DVR - 94 - The numeric keys on the IR remote controller is can be programmed with 9 array methods of Picture-In-Picture, you can configu

DR3 User’s Manual - 95 - 8.3.4 The Border of Frame When you use 2 channel video inputs, you can enable/disable or select different styles of frame f

Configure DR3 DVR - 96 - Switch on Border option to enable frame of video for Picture-In-Picture function. At the same time, you can switch on Bor

DR3 User’s Manual - 97 - 8.3.5 Background Color of Screen You can select 4 different color of screen background. 8.3.6 Configuration Menu Output 2 C

Synchronize Video - 98 - 9. Synchronize Video between CF & PC Click Sync button to synchronize the recording video between CF card & PC.

DR3User’s Manual - 99 - After you select all files that you want to synchronize, then click Sync button to start synchronization.

Synchronize Video - 100 -

DR3User’s Manual - 101 - In task column, the result item will display status of files. If you startup Desktop software via CF card, Desktop will dis

Synchronize Video - 102 - Click to open working folder on PC.

DR3User’s Manual - 103 - In synchronization, the .csf MPEG-2 recording file will be converted to standard MPEG-2 video automatically.

DR3 User’s Manual - 5 - 2.2.3 Startup 1) Connect AC power adapter 2) DR3 will start self-diagnostics when power on 3) The LED is red in self-diagno

Synchronize Video - 104 -

DR3User’s Manual - 105 - 10. MPEG-2 Converter Click Conversion button to render MPEG-2 recording video manually. Recorded MPEG-2 file have to b

MPEG-2 Converter - 106 - Then select .csf file that you want to convert. After you select the source file to convert, detailed information of the r

DR3User’s Manual - 107 - For better performance of conversion, it is recommended that source file is on the CF card in a card reader and target fil

Advanced Configuration - 108 - 11. Advanced Configuration Click Advanced Configuration button to configure system environment.

DR3 User’s Manual - 109 - You can select working directory on PC to as synchronize folder, set search sequence for startup, change network configurat

Advanced Configuration - 110 - Click OK button to confirm your selection. 11.2 Configure Desktop Startup Method DR3 Desktop will detect Network

DR3 User’s Manual - 111 - The default sequence of DR3 Desktop is detecting valid network connection between DR3 & PC in first, then detect CF card

Advanced Configuration - 112 - 8. Change the your PC IP address to 192.168.0.100 9. Connect DR3 to PC via network connection cable 10. Power on DR3

DR3 User’s Manual - 113 - You can change IP address of DR3 manually.

Installation - 6 - 2.3 Connect Video/Audio signal & Monitor to DR3 2.3.1 DR3-S1 DR3-S1 support video output, you can connect external LCD or m

Advanced Configuration - 114 - Or you can let DR3 obtain IP address from DHCP server on your local LAN if you connect DR3 to router or switch. But ple

DR3 User’s Manual - 115 - Then set Startup Search option to CF Card Only item.

Advanced Configuration - 116 - After you configure it, you can startup Desktop software only via CF card without network connection for the future. C

DR3 User’s Manual - 117 - If DR3 Desktop detect a new CF card, system will prompt you select a correctly disk that point to CF card. After you se

Advanced Configuration - 118 - Once DR3 Desktop finished initialization, it wills start-up automatically. Some functions are active when Desktop

DR3 User’s Manual - 119 - 11.3 Configure Network Configuration of DR3 You can change IP address of DR3 manually.

Advanced Configuration - 120 - Or you can let DR3 obtain IP address from DHCP server on your local LAN if you connect DR3 to router or switch. But ple

DR3 User’s Manual - 121 - 11.4 Auto Synchronize Date & Time between PC & DR3 DR3 Desktop will synchronize Date & Time information based

Advanced Configuration - 122 - 11.5 Calibrate System Clock of DR3 Sometimes the system clock of the DR3 need to be calibrated for accurate time reco

DR3 User’s Manual - 123 - Click Yes (Y) button to confirm it again. After you confirm it, the DR3 will begin to calibrate system clock. After

DR3 User’s Manual - 7 - 2.3.2 DR3-X1 DR3-X1 has not enough power for external LCD or monitor because it has large TFT LCD, you can preview real-time

Advanced Configuration - 124 - When system clock of DR3 be calibrated & rebooted, LCD on DR3 will display correlative status information. 11.5.1

DR3 User’s Manual - 125 - 12. About Click About button to get the details information of DR3 Desktop.

Configuration DR3 using LCD Menu - 126 - 13. Configure DR3 by LCD Menu 13.1 Configure DR3-S1 using LCD Menu 13.1.1 Enter/Quit LCD Configuration Menu

DR3 User’s Manual - 127 - When you finish configuration, press button one or two times once to quit the LCD configuration menu. 13.1.2.2 Configure

Configuration DR3 using LCD Menu - 128 - Menu Menu Item Parameter VIDEO Standard STANDARD ● NTSC ● NTSC-433 ● PAL ● SECAM VIDEO VIDEO Mode MODE ● NO

DR3 User’s Manual - 129 - ● Menu Item – VIDEO / Mode Default parameter is NORMAL, please select feat video record mode for your application. Switch

Configuration DR3 using LCD Menu - 130 - ● High ● Menu Item – AUDIO / Source Default parameter is Line In, please select Ext MIC if you use external

DR3 User’s Manual - 131 - After you finish all audio configuration, press button or Key to quit the AUDIO menu. 13.1.3.4 RECORD Me

Configuration DR3 using LCD Menu - 132 - ● Profile2 …… ● Profile9 ● Custom RECORD Filename FILENAME ● Standard ● Extended ● Menu Item – RECORD / Fo

DR3 User’s Manual - 133 - ● Menu Item – RECORD / Auto REC Default value of Auto REC is Disable, if you want to enable DR3 to record au

Installation - 8 - 2.3.3 2 Channel DR3 2.3.4 3 Channel DR3

Configuration DR3 using LCD Menu - 134 - Switch LEFT & RIGHT position of 3-Position switch or press Key to switch Disable & Enable opti

DR3 User’s Manual - 135 - …… The special Custom profile can’t be edit on DR3 Desktop, it only valid on LCD menu. You can change confi

Configuration DR3 using LCD Menu - 136 - 13.1.3.5 OSD Menu Menu Menu Item Parameter OSD OSD Stamp STAMP ● Disable ● Enable ● Menu Item – OSD

DR3 User’s Manual - 137 - 13.1.3.6 SYSTEM Menu Menu Menu Item Parameter SYSTEM Date DATE ● 07-04-02 SYSTEM Time TIME ● 12:00:00 SYSTEM Beep BEEP ●

Configuration DR3 using LCD Menu - 138 - month; then switch LEFT position of 3-Position switch or press Key switch to day area, switch RIGHT posi

DR3 User’s Manual - 139 - ● Menu Item – SYSTEM / Beep DR3-S1 will beep or vibrate to warn you when it starts or stops recording, in some special appl

Configuration DR3 using LCD Menu - 140 - the current configuration, press button or Key to quit the SYSTEM / CAM VOLT menu. …… ● Menu It

DR3 User’s Manual - 141 - This menu item display current boot loader version on your DR3-S1. Press button or Key to display current boot loader

Configuration DR3 using LCD Menu - 142 - Press button or Key to change network connection method between DIRECT or LAN connection, press button

DR3 User’s Manual - 143 - ● Menu Item – BEACON / LapTimer Beacon option is only for LAP Timer version DR3. Default status of Lap Timer is Disable, p

DR3 User’s Manual - 9 - 2.3.5 4 Channel DR3 CAM/AV Adapter Cable for 4CH DR3 include two different model, one with BNC connector for video input/

Configuration DR3 using LCD Menu - 144 - If you use Split Beacon on racing, you must switch Split Signal Same as Beacon option to enable it. The defa

DR3 User’s Manual - 145 - ● Menu Item – BEACON / SysClock The system clock of the DR3-S1 need to be calibrated for accurate time recording, it is im

Configuration DR3 using LCD Menu - 146 - MODE - Normal - Sports SOURCE - Line In - Ext MIC - Int MIC AUDIO GAIN - Lowest - Lower - Low - Medium - High

DR3 User’s Manual - 147 - - 15 Mins BOOTLOAD V1.0.0 FIRMWARE 08-09-27 NETWORK - Direct - LAN LAPTIMER - Disable - Enable MASKTIME 10 Sec AS SPLIT - Y

Configuration DR3 using LCD Menu - 148 - You may need press button or Key on IR remote control one or two times once depend on your position in m

DR3 User’s Manual - 149 - 13.2.3 LCD Configuration Menu Details 13.2.3.1 Menu The valid menu of DR3-X1 is: ● VIDEO ● AUDIO ● RECORD ● OSD ● SYST

Configuration DR3 using LCD Menu - 150 - Switch DOWN & UP position of 3-Position switch or press Key to switch the video standard para

DR3 User’s Manual - 151 - SPORTS MODE is optimized for recording of moveable quickly object, such as racing & extreme sports, you will get clear &

Configuration DR3 using LCD Menu - 152 - If you record audio from internal or external microphone, you can set different volume gain depend on the sen

DR3 User’s Manual - 153 - Default parameter is MPEG-4, please select feat video format that you need. Switch DOWN & UP position of 3-Posi

Installation - 10 - 2.5 Button/Bullet Camera Interface Some button cameras can connect to DR3 directly without the jump cable if the interface of butt

Configuration DR3 using LCD Menu - 154 - Switch DOWN & UP position of 3-Position switch or press Key to switch Disable & Enable op

DR3 User’s Manual - 155 - ● Menu Item – RECORD / Audio When you into this menu, you can open & close audio input when you record video. When yo

Configuration DR3 using LCD Menu - 156 - Switch DOWN & UP position of 3-Position switch or press Key to switch current profile item. The

DR3 User’s Manual - 157 - Switch LEFT & RIGHT position of 3-Position switch or press Key to select standard or extended filename. 13.

Configuration DR3 using LCD Menu - 158 - Switch DOWN & UP position of 3-Position switch or press Key to switch Disable & Enable option

DR3 User’s Manual - 159 - month; then switch DOWN position of 3-Position switch or press Key switch to day area, switch UP position of 3-Posit

Configuration DR3 using LCD Menu - 160 - DR3-X1 will beep or vibrate to warn you when it starts or stops recording, in some special applications or oc

DR3 User’s Manual - 161 - Switch DOWN & UP position of 3-Position switch or press Key to select feat output voltage for external camera,

Configuration DR3 using LCD Menu - 162 - Switch DOWN & UP position of 3-Position switch or press Key to Disable LCD Off or select feat

DR3 User’s Manual - 163 - Switch DOWN & UP position of 3-Position switch or press Key to Disable or Enable LCD Flip depending on the po

DR3 User’s Manual - 11 - 3. Operation of DR3 DR3-S1 DR3-X1 2CH/3CH/4CH DR3 3.1 Quick Start No configuration is required to start recording w

Configuration DR3 using LCD Menu - 164 - If you want to connect DR3 to PC directly, please set DR3 network connection to DIRECT, or set DR3 to LAN con

DR3 User’s Manual - 165 - screen, using Switch DOWN & UP position of 3-Position switch or press Key to select OK, press button or Key

Configuration DR3 using LCD Menu - 166 - Enter menu, select CF CARD option, then select TEST item, DR3 will test write & read performance of CF ca

DR3 User’s Manual - 167 - 13.2.3.8 BEACON Menu Beacon option is only for LAP Timer version DR3. ● Menu Item – BEACON / LapTimer Default sta

Configuration DR3 using LCD Menu - 168 - Switch DOWN & UP position of 3-Position switch or press Key to switch Disable & Enable option

DR3 User’s Manual - 169 - Switch DOWN &UPposition of 3-Position switch or press Key to switch No & Yes option, then press button or

Configuration DR3 using LCD Menu - 170 - After you confirm True Up operate, the DR3-X1 will begin to calibrate system clock. After the syste

DR3 User’s Manual - 171 - STANDARD - NTSC - NTSC-433 - PAL - SECAM VIDEO MODE - Normal - Sports SOURCE - Line In - Ext MIC - Int MIC AUDIO GAIN - Lowe

Configuration DR3 using LCD Menu - 172 - - 6 V POWEROFF - Disable - 1 Min - 5 Min - 10 Min - 15 Min LCD OFF - Disable - 15 Sec - 30 Sec - 1 Min LCD FL

DR3 User’s Manual - 173 - After you finish configuration, press button or Key on IR remote control to quit to upper menu. You may need pre

Operation of DR3 - 12 - 3.2 Push Button 3.2.1 RECORD Press the (REC) button on top of DR3 for at least one second to start recording. The LED will

Configuration DR3 using LCD Menu - 174 - select the parameter value & parameter area that you want to configure, and then press button to save t

DR3 User’s Manual - 175 - The PIP, PIP-2, PIP-2-B, H-Split, V-Split, PIP-3 & PIP-3-B is valid PIP mode for 4CH DR3. Switch DOWN & UP positio

Configuration DR3 using LCD Menu - 176 - The valid input option of 3CH DR3 is CH_1 & CH_2, and the valid layout option of 3CH DR3 is PIP, H-S

DR3 User’s Manual - 177 - ● Menu Item – 4 CH / Size When you connect more than one camera & select PIP Layout mode, you can set secondary vi

Configuration DR3 using LCD Menu - 178 - You can select 4 different color of screen background. ● Menu Item – 4 CH / AV Menu 2/3/4 Channel DR3

DR3 User’s Manual - 179 - 14. Firmware Upgrade NOTE: Please don’t connect camera & other external device to DR3 when you upgrade DR3! The firmwa

Firmware Upgrade - 180 - * To Upgrade 4 Channel DR3 , after reboot successfully, you must power off & power on 4 Channel DR3 manually. The file,

DR3 User’s Manual - 181 - 15. FAQ 1) LED yellow flash CF card is full. Change CF. 2) LED is red Failure or battery is low. Use the AC power adapte

Appendix - 182 - Appendix Appendix A: Details of connector Appendix A Multi-Connect Interface on Board 1- Audio Left 2- Audio Right 3- Video Input 0

DR3 User’s Manual - 183 - Appendix B: Edit Recording Video You can edit recording video that be record by DR3, for editing, import recording video to

DR3 User’s Manual - 13 - Numeric Key on IR remote Controller Item in Position Menu 1 2 3 4 5 6 7 8 9 Table showing numeric key on IR remote

Revision - 184 - Revision 04/28/2009, Version 2.0.5  Improve DR3 Desktop Start-Up  Add Sports recording Mode  Add POWERREC recording mode  Ad

DR3 User’s Manual - 185 -  Add Record Key Frame option for surveillance application  Change some default configuration  Change configuration fil

Revision - 186 - ● Fix some bug ● Release DR3 Configure Utility V1.0.5 Final version ● Release Firmware V1.0.5 Image upgrade file Final version ●

CAUTION!!! Read this User Manual carefully. There are no user serviceable parts inside. Removing the end plate screws will void your warranty. If y

Operation of DR3 - 14 - 3.5 LANC Remote Control The DR3 support multi-version LANC Remote Control, please power off DR3 & unplug AC Power adapter,

DR3 User’s Manual - 15 - To power on TFT LCD again, please hold button 2 second to power on TFT LCD under normal status; if DR3 under recording sta

Operation of DR3 - 16 - 3.8.2 Extended Filename Under extended filename, you can name recording video using time that you record & frames of reco

DR3 User’s Manual - 17 - 4. DR3 Status 4.1 Status of DR3 ☯ Power up: LED is yellow for less then 1 second. ☯ Self diagnostics: LED is red for abo

DR3 Status - 18 - Turn 3-Position switch to RIGHT twice to display current energy of internal Li-Ion Polymer battery. 4.2.1 DR3-X1 & 2/3/4C

DR3 User’s Manual - 19 -

Replay Video - 20 - 5. Replay Video 5.1 Software It is simple to replay video recorded on CF card. Media player can play the video files directly wit

DR3 User’s Manual - 21 - 6. Install DR3 Desktop 6.1 DR3 Desktop Installation Install DR3 Desktop before you use the DR3 for the first time. Run setup

Install DVR Desktop - 22 - After you select the target folder, Click Next > button to confirm it. Click Next > button to start DR3

DR3 User’s Manual - 23 - Click Close button to finish it when installer prompt you the installation is successfully.

DR3 User’s Manual I Contents 1. Introduction...

Install DVR Desktop - 24 - After you install the DR3 Desktop, the software shortcut DR3 Desktop will be generated on the desktop and DR3 program fo

DR3 User’s Manual - 25 - 7. Configure DR3 The DR3-S1s initialized as DEVICE.INI under the root directory of the CF card. It must be in the root dir

Configure DR3 - 26 - The default IP address of DR3-S1s 192.168.0.152, please ensure your PC on same IP segment for first connection. If yours PC &

DR3 User’s Manual - 27 - 5. Enter SYSTEM menu, then select NETWORK item, set DR3 to DIRECT connection 6. Save configuration 7. Start DR3 Desktop s

Configure DR3 - 28 - You can change IP address of DR3 manually.

DR3 User’s Manual - 29 - Or you can let DR3 obtain IP address from DHCP server on your local LAN if you connect DR3 to router or switch. But please no

Configure DR3 - 30 - Then set Startup Search option to CF Card Only item.

DR3 User’s Manual - 31 - After you configure it, you can startup Desktop software only via CF card without network connection for the future. Connect

Configure DR3 - 32 - If DR3 Desktop detect a new CF card, system will prompt you select a correctly disk that point to CF card. After you select

DR3 User’s Manual - 33 - Once DR3 Desktop finished initialization, it wills start-up automatically. 7.2 DR3 Desktop Description 7.2.1 DR3 Desktop

Contents II 4.2.1 DR3-X1 & 2/3/4CH DR3 ...18 5. Replay Video...

Configure DR3 - 34 - DR3 Desktop include six part, you can using DR3 Desktop to configure the video format, average bit rate, audio in, TV system, t

DR3 User’s Manual - 35 - 7.2.2 DR3 Desktop Interface Click Device Configure button on the title bar to configure the DR3 .

Configure DR3 - 36 - 7.2.3 Save, Cancel & Reset Setting In all pop configuration menus, you can save, cancel or reset setting to default.

DR3 User’s Manual - 37 - When you finish all setting, you can click OK button to save configuration & exit current configuration menu. If yo

Configure DR3 - 38 - 7.3.1 Video System Please select correct video standard which corresponding to the video source of camera. Default video standa

DR3 User’s Manual - 39 - The default configuration is Enable Beep/Vibration function; you can disable it in DR3 Desktop. Switch off Enable Beep/V

Configure DR3 - 40 - 7.3.3 Record on Power On In some applications, you may need the DR3 to record automatically once the DR3-S1s powered on. You can

DR3 User’s Manual - 41 - You can select Normal Record Mode option to enable normal record mode if current configuration is cycle item. If you want

Configure DR3 - 42 - If you set the DR3-S1n cycle record mode, all old recorded video file on the CF card will be deleted on system startup. 7.3.4.

DR3 User’s Manual - 43 - 7.3.5 Motion Detection When you use DR3 on surveillance application, such as security surveillance, scout, wildlife protect &

DR3 User’s Manual III 7.8.4 Reset selected profile item to default configuration ...61 7.8.5 Backup & Restore Configuratio

Configure DR3 - 44 - Actual duration time is always timed based on the last suited locomotors object that be detected by DR3 . Motion Detection funct

DR3 User’s Manual - 45 - For DR3-X1 & 2/3/4CH DR3, because it include built-in large TFT screen, so you can set product name to 30 characters, 15

Configure DR3 - 46 - 7.4.1 Video Format Select MPEG-2 or MPEG-4 format for your recording video. 7.4.2 Video Quality Select proper video quality

DR3 User’s Manual - 47 - 7.5 Picture Adjust Click Picture tab to adjust picture of recording quality. You can adjust the brightness, contrast

Configure DR3 - 48 - 7.6 OSD Configuration Click OSD tab to configure Time Stamp & OSD information. You can display Time Stamp & cust

DR3 User’s Manual - 49 - You can place date & time stamp on four area of screen: Left Top, Right Top, and Left Bottom & Right Bottom. You can

Configure DR3 - 50 - At once you don’t active Enable OSD option, Time Stamp & all customized text OSD information will disappear on screen &

DR3 User’s Manual - 51 - At once you enable Lap Timer function on DR3 /w Lap Timer edition, the Lap Timer data will be recorded on recording video

Configure DR3 - 52 - 7.7.1 Set Driver Information After enable Lap Timer function, you can record driver name, team, and circuit for racing, make &a

DR3 User’s Manual - 53 - If you use Split Beacon on racing, you must switch Split Signal Same as Beacon option to enable it.

Contents IV 13.1.4 LCD Configuration Menu Structure ...145 13.2 Configure DR3-X1...

Configure DR3 - 54 - You can select the amount of Split Beacon for every loop; the maximum amount of Split Beacon is four on every loop. If you don’

DR3 User’s Manual - 55 - DR3 can record most 129 loops Lap Timer data on single recording video. The Time Stamp will be disabled when you enable t

Configure DR3 - 56 - The Beacon Configuration option is only for the special edition of DR3 with Lap Timer function. 7.7.3 Adjust Position of Lap Ti

DR3 User’s Manual - 57 - 7.7.4 Connection Simply connect the External Beacon Receiver into the Beacon jack on the DR3 and point the External Beacon Re

Configure DR3 - 58 - 7.7.6 Recording of Lap Time The time of each lap is record in the DVR_xxx.txt file. The file will looks like: Hostname Team WO

DR3 User’s Manual - 59 - You can configure & save multi-profiles item using DR3 Desktop. You can label every profile item using special name tha

Configure DR3 - 60 - Input name of the second profile item in name area, then click OK button to save it. Now you can configure the second profi

DR3 User’s Manual - 61 - Then click to delete it. After you delete anyone profile item, the profile item after it will ascend to current arrange

Configure DR3 - 62 - Certainly, you can reload configuration data that you backup previously to restore DR3 to special configuration, import backu

DR3 User’s Manual - 63 - 7.8.6 Reboot DR3 after you finish configuration After you finish all profile configurations, you can reboot DR3 using curre

DR3 User’s Manual - 1 - 1. Introduction 1.1 Introduction of DR3 The DR3 is a dedicated battery powered Digital Video Recorder designed for portable

Configure DR3 - 64 - 7.8.7 Switch Configuration Item You can switch configuration item via LCD Menu during use DR3 .

DR3 User’s Manual - 65 - 8. Configure 2/3/4 Channel DR3 Multi-Channels DR3-S1nclude 2 Channels, 3 Channels & 4 Channels model, you can connect

Configure DR3 DVR - 66 -

DR3 User’s Manual - 67 - 8.1 Configure 4 Channel DR3 The 4-Channel DR3 can connect four video inputs at the same time. Click Advanced button t

Configure DR3 DVR - 68 - After you set DR3 Desktop to 4 Channel DR3 version, you can Click 4 Channel tab on Device Configuration area to config

DR3 User’s Manual - 69 - 8.1.1 Video Input You can select 1, 2, 3 or 4 channel video inputs at the same time, and record these video in the same rec

Configure DR3 DVR - 70 - If you want to record 4 channel video at the same time, please select QUAD. The recorded video will include 4 channel video

DR3 User’s Manual - 71 - PIP-2 item is for 3 channel video inputs at the same time, the 3 channel videos will be recorded in one video file at th

Configure DR3 DVR - 72 - V-Split item is for 2 channel video inputs at the same time, the 2 channel videos will be recorded in one video file at the

DR3 User’s Manual - 73 -

Introduction - 2 -  Intelligent and uninterrupted battery and AC power swap in real time  Capture Video & Audio live from any composite video

Configure DR3 DVR - 74 - 8.1.3 Picture-In-Picture (PIP) You can configure any position for PIP recording video, it has nine different positions, and y

DR3 User’s Manual - 75 - The numeric keys on the IR remote controller is can be programmed with 9 array methods of Picture-In-Picture, you can configu

Configure DR3 DVR - 76 - 8.1.4 The Border of Frame When you use 2 or 4 channel video inputs, you can enable/disable or select different styles of fram

DR3 User’s Manual - 77 - You can select 4 different styles of border frame. 8.1.5 Background Color of Screen You can select 4 different color of sc

Configure DR3 DVR - 78 - Click Advanced button to configure DR3 Desktop to 3 Channel DR3 version. After you set DR3 Desktop to 3 Channel DR3 vers

DR3 User’s Manual - 79 - 8.2.1 Video Input You can select 1, 2 or 3 channels video inputs at the same time, and record these video in the same recor

Configure DR3 DVR - 80 - PIP item is for 2 channels video inputs at the same time, the 2 channels videos will be recorded in one video file at the s

DR3 User’s Manual - 81 - PIP-2-B item is another arranges method for 3 channel video inputs at the same time, the 3 channel videos will be record in

Configure DR3 DVR - 82 - The default size is 1/9 of full screen. The layout of three sizes as follow:

DR3 User’s Manual - 83 - 8.2.3 Picture-In-Picture (PIP) You can configure any position for PIP recording video, it has nine different positions,

DR3 User’s Manual - 3 - * When you connect AC power adapter to charge internal Li-Ion battery but don’t record, please enable Power-Off option to decr

Configure DR3 DVR - 84 - The numeric keys on the IR remote controller is can be programmed with 9 array methods of Picture-In-Picture, you can confi

DR3 User’s Manual - 85 - 8.2.4 The Border of Frame When you use 2 or 3 channel video inputs, you can enable/disable or select different styles of fr

Configure DR3 DVR - 86 - Switch on Border option to enable frame of video for Picture-In-Picture function. At the same time, you can switch on Bor

DR3 User’s Manual - 87 - 8.2.5 Background Color of Screen You can select 4 different color of screen background. 8.2.6 Configuration Menu Output 3 C

Configure DR3 DVR - 88 - After you set DR3 Desktop to 2 Channel DR3 version, you can Click 2 Channel tab on Device Configuration area to config

DR3 User’s Manual - 89 - 8.3.1 Video Input You can select 1 or 2 channels video inputs at the same time, and record these video in the same recordin

Configure DR3 DVR - 90 - PIP item is for 2 channels video inputs at the same time, the 2 channels videos will be recorded in one video file at the s

DR3 User’s Manual - 91 - V-Split item is for 2 channel video inputs at the same time, the 2 channel videos will be recorded in one video file at the

Configure DR3 DVR - 92 -

DR3 User’s Manual - 93 - 8.3.3 Picture-In-Picture (PIP) You can configure any position for PIP recording video, it has nine different positions, and y